Knowledgebase:
E-Flite LP5/HP6DSM Dip Switch Settings
Posted by Jeff Fryer on 12 November 2015 01:26 PM

Blade SR Transmitter (HP6DSM)
// LP6DSM (from the sooSRX) no change noticed on #1, 9, 10

Dip Switch 1*
Up – Channel 1/Throttle channel reversed
>Down – Channel 1/Throttle channel normal
*For safety, channel 1/throttle channel reversing can only be changed when the transmitter is powered off. All
other dip switch positions/functions can be changed while the transmitter is powered on.

Dip Switch 2
Up – Channel 2/Aileron channel reversed << UP for CX2/3 >><< Down for mCX >>
>Down – Channel 2/Aileron channel normal

Dip Switch 3
Up – Channel 3/Elevator channel reversed << Up for CX2/3 >><< Down for mCX >>
->Down – Channel 3/Elevator channel normal

Dip Switch 4 << Up for mCX >>
Up – Channel 4/Rudder channel reversed
->Down – Channel 4/Rudder channel normal

Dip Switch 5
Up – Channel 5/Gear channel reversed
->Down – Channel 5/Gear channel normal

Dip Switch 6
Up – Channel 6/Pitch channel reversed
->Down – Channel 6/Pitch channel normal

Dip Switch 7
->Up – Helicopter Mode (Channel 6 becomes <<Down for CX2/3 >><< Down for mCX >>
pitch channel)
Down – Airplane Mode (Channel 6 becomes an extra aileron channel)

Dip Switch 8*
->Up – 120-degree Cyclic Collective Pitch Mixing (CCPM)
Down – Standard mixing
*Only functions when in helicopter mode.

Dip Switch 9*
Up – Rudder/Elevator mixing
->Down – No mixing
*Only functions when in airplane mode, and no function if switch 10 is in the up position.

Dip Switch 10*
Up – Elevator/Aileron mixing
->Down – No mixing
*Only functions when in airplane mode, and no function if switch 9 is in the up position.


1. THRO
2. AILE
3. ELEV
4. RUDD
5. GEAR
6. PITC
7. Heli mode
8. 120 CCPM
9. Rudd/Elev mix
10. Elev/Ail mix

======================================================================================

LP5DSM - DIP Switches
1. Air/Heli
2. Norm/CCPM
3. Elev+Rudd
4. Elev+Aile
5. Thro Rev
6. Aile Rev
7. Elev Rev
8. Rudd Rev
9. Ch5 Rev
10.Ch6 Rev

CX2/3 1,6,7
mCX SR120 1,8 up

====================================================
CP Pro2
HP6DSM stock settings

7 8
1 2 3 4 5 6 9 10

AILE (Aileron) Channel—Left-hand rear aileron servo
ELEV (Elevator) Channel—Forward elevator servo
AUX1 (Pitch) Channel—Right-hand rear pitch servo
-----------------------
SR
HP6DSM stock settings

2 7 8
1 3 4 5 6 9 10

Right servo is AUX1
Left servo is AILE