Knowledgebase : Multirotors

 

 

  350 QX How To Videos 

https://www.youtube.com/playlist?list=PL5hg0ZxrRWLHIa2EVheQ7TyzUMTIuJp6P

Videos included in this playlist

  •          Blade 350 QX Unboxing, Assembly and Startup

o   Published on Sep 10, 2013

o   http://youtu.be/HDjKgtu_csA

 

  •          350 QX - DX18 Radio Setup

o   Published on Oct 11, 2013

o   http://youtu.be/UfQwasB-yHU

 

  •          350 QX - DX7S Radio Setup

o   Published on Oct 11, 2013

o   http://youtu.be/qbs9A3mHUWM

 

  •          350 QX - DX6i Radio Setup

o   Published on Oct 11, 2013

o   http://youtu.be/Zvdy8VScNgA

 

  •          350 QX - DX9 Radio Setup

o   Published on Oct 11, 2013

o   http://youtu.be/V4ijx-UYj60

 

  •          350 QX - DX8 Radio Setup

o   Published on Oct 11, 2013

o   http://youtu.be/G96kJj3HPMA

 

  •          350 QX Pre-Flight Checklist

o   Published on Dec 10, 2013

o   http://youtu.be/iSTwCKQuc10

 

  •          350 QX Accelerometer Calibration

o   Published on Dec 10, 2013

o   http://youtu.be/xGlgQQDGyV4

 

  •          350 QX ESC Replacement and Motor Assignment

o   Published on Dec 10, 2013

o   http://youtu.be/3QN6-9mVcdw

 

  •          350 QX Pressure Sensor Calibration

o   Published on Dec 10, 2013

o   http://youtu.be/KSe6hITpr_o

 

  •          350 QX Compass Calibration

o   Published on Dec 10, 2013

o   http://youtu.be/zb5hLId5u-Y

 

  •          350 QX2 Overview - Whats New?

o   Published on Aug 19, 2014

o   http://youtu.be/87KDpMMcQp4

 

  •          350 QX2 Flight Modes Overview

o   Published on Aug 19, 2014

o   http://youtu.be/nSOGKxRtomA

 

  •          How-To: Calibrate the Spektrum DX4 Sticks

o   Published on Sep 5, 2014

o   http://youtu.be/6JOvd6TSiYk

 

  •          How-To: Blade 350 QX2 AP Unboxing and Initial Setup

o   Published on Aug 5, 2014

o   http://youtu.be/8tIMkufHjUs

 

  •          Copper Shield Install Instructions - Blade 350 QX

o   Published on Mar 25, 2014

o   http://youtu.be/CZ1Tc_BYlmc

 

 

- Additional Videos -

 

  •          350 QX Firmware 2.0 Announced

o   Published on Mar 7, 2014

o   http://youtu.be/ATaIgJ4CtrY

  •          How-To: GB200 Brushless Gimbal Firmware Update

o   Published on Sep 17, 2014

o   http://youtu.be/nsdBwXQliYc

  •          How-To: Bind the Blade 350 QX2 and 200QX

o   Published on Sep 16, 2014

o   http://youtu.be/p16MI2nDRdE

  •          How To: Setting 350 QX2 Gimbal Tilt Control with the Spektrum DX8 Transmitter

o   Published on Jul 29, 2014

o   http://youtu.be/QPHgDzDtJ9c

  •          How-To: Setting The Camera Tilt On The Blade 350 QX2 AP Combo RTF

o   Published on Jul 25, 2014

o   http://youtu.be/nOL-_aZpbRE

 

R/C Transmitter Configuration

Depending upon the R/C transmitter in use, certain parameters need to be modified in order to ensure compatibility with the Vortex 250 Pro, and more importantly with the Cleanflight Flight Controller firmware.

In all cases, during the wizard setup, the current ‘PPM Value’ is shown on-screen beside each control. This value must be as close as possible to a min. of 1000, center of 1500, and max. of 2000.

It is highly recommended to start with a ‘clean’ configuration (new model) for all radios.

Spektrum™ Radios

  • Two channels need reversing, AIL, and RUD.
  • Map channel 5 to a 2 or 3-position switch to control flight mode (Acro/Horiz or Acro/Level/Horiz).
  • Verify that the endpoints are 1000/1500/2000 as described above.

FrSky Taranis Radio

  • Map channel 5 to a 3-position switch to control flight mode (Acro/Level/Horiz).
  • Verify that the endpoints are 1000/1500/2000 as described above.

Futaba S‐Bus Radios

  • Map channel 5 to a 3-position switch to control flight mode (Acro/Level/Horiz).
  • Reverse channels ELE and THR
  • Change subtrim to -31 for THR, AIL, ELE, RUD
  • Change travel to +/- 119 on all channels.
  • Verify that the endpoints are 1000/1500/2000 as described above.

Follow this link for the full manual

Zugo™ 2MP HD Camera Drone RTF (HBZ8700)

Binding

  1. Quad
    1. Connect a charged battery
  2. Transmitter
    1. Press in on the throttle
    2. Power on the transmitter
    3. Raise the throttle
    4. Lower the throttle
  3. Raise the throttle to start the motors

12/23/2016

http://www.horizonhobby.com/zugo-rtf-2mp-camera-quad-hbz8700

http://www.horizonhobby.com/pdf/HBZ8700-Manual-MULTI.pdf